How to Replace Mechanical Fan 2002 Jeep Grand Cherokee

How to Replace a Jeep Cherokee Lover Clutch

by Gary Proulx

major snarl-up 2 envision by Aaron Kohr from Fotolia.com

The mechanical fan in your Jeep Cherokee uses a viscous clutch to keep the railway locomotive within its normal operational temperature zone. A scratched or bad fan clutch bag can quickly lead story to overheating. It is a good idea to routinely audit the fan and its clutch, as it is difficult to detect any damage to the gathering by simply looking at it. With the locomotive away and cold, the fan should freely rotate by turn over. With the engine off and hot, the fan should demo some drag when turned past hand.

Dance step 1

Open the cowling of your Cherokee. Remove the negative battery clamp by using the wrench to turn the clamp nut in a counterclockwise direction. The negative terminal is marked by a " - " symbol connected the assault and battery case, almost the clinch.

Step 2

Remove the shroud mounting bolts from the top of the shroud by using the wrench to turn over them counterclockwise. The shroud is the plastic enclosing which surrounds the winnow. Pull the shroud up and over the winnow.

Mistreat 3

Place the clutch, which is bolted to the back of the fan. Remove the iv clutch mounting bolts connected the back of the grip by turn them sinistral with the wrench. Remove the fan and clutch meeting place from the engine compartment.

Step 4

Transfer the bolts and nuts that impound the fan to the clutch by turn the bolts levorotary with the wrench. These bolts and kooky will be reused to climb on the fan onto the new clutch.

Tone 5

Place the buff onto the unprecedented clutch. Tighten the buff mounting bolts and nuts by turning them clockwise with the twist.

Step 6

Reinstall the four clutch bag mounting bolts by turn them clockwise with the wring out.

Step 7

Place the shroud back into position. Tighten the winding-clothes mounting bolts by turn them in a dextral direction with the wrench.

Reconnect the negative barrage fire clamp by turn the clinch nut dextrorotatory with the ric.

References

• " Jeep Cherokee 1984 thru 2001, Haynes Repair Non-automatic"; Bob Henderson and John H. Haynes; 2005

Tips

• The clutch climb bolts are small and easy to drop when removing. Place a sheet or cloth under the vehicle to come through easier to find dropped nuts.

Things You'll Indigence

• Pull set out

Warnings

• Never work on or around the rooter if the engine is running.
• Do not allow the fan to come into contact with the radiator fins.

Writer Bio

Gary Proulx has been writing since 1980. He specializes in automotive vehicle technology and gasoline and diesel design. Proulx has had quintuple articles publicized on varied websites. He is also an archery good World Health Organization writes about the ins and outs of archery arsenic a sport.

More Articles

How to Replace Mechanical Fan 2002 Jeep Grand Cherokee

Source: https://itstillruns.com/replace-jeep-cherokee-fan-clutch-7236282.html